Skip to workshop content

35°12'N 135°55'E — Otsu, Shiga · Kyoto Ki-Oke Lineage Since 1933

Wood joined by tension alone.

Third-generation wooden vessels, champagne coolers, and sculptural stools planed by hand from Japanese cypress and 2,000-year buried cedar at the foot of Mount Hira. Every stave is beveled to fit watertight without nails or adhesive.

View Selected Works
Construction
Zero nails, zero glue
Timber Seasoning
10–15 years air-dried
Collections
V&A London · MAD Paris
Hand-planed Koyamaki Japanese cypress ki-oke vessel bound with two dark hammered copper hoops resting on a charred cedar plinth beside a shoji screen

Plate 01 · Kōyamaki Cypress

Konoha Champagne Cooler

01 / Selected Editions

Made to order at the Hira bench.

Each piece is shaped stave by stave after timber reaches stable humidity. Prices include hand-finished wooden paulownia storage boxes and direct studio dispatch from Shiga.

Konoha Champagne Cooler in Japanese umbrella pine with hammered copper hoops

Kōyamaki · Copper Hoops

Konoha Champagne Cooler

Carved along a sweeping asymmetric leaf rim that guides condensation down the interior wall. Commissioned internationally for Dom Pérignon vintage service.

Dimensions
280 × 175 × 240 mm
Lead Time
3–4 months
¥165,000
Ki-Oke Stool built from ancient smoky gray Jindai-sugi cedar staves with flush oxidized copper rings

Jindai-Sugi · Oxidized Copper

Ki-Oke Jindai-Sugi Stool

Developed with OeO Studio in Copenhagen from volcanic-ash buried cedar over two millennia old. Thick vertical staves bear full structural weight with two recessed copper bands.

Dimensions
Ø 310 × H 440 mm
Lead Time
5–6 months
¥528,000
Sawara cypress staves being hand-planed on the Mount Hira wooden workbench

Kiso Sawara · Daily Vessels

Ohitsu Rice Tub & Yoke Bucket

Soft, resin-light Kiso Sawara draws excess steam from freshly cooked rice while keeping grains glossy. Available individually or paired with a matching bath bucket.

Capacity
3-gō / 5-gō (Ø 210 mm)
Lead Time
6–8 weeks
¥55,000
Close-up of a traditional Japanese wooden kanna hand plane with curled cypress shavings

Yoshino Hinoki · Mirror Planed

Katakuchi Sake Set & Re-Hooping

Finished strictly with a razor-tuned steel kanna rather than sandpaper, leaving timber cells sliced cleanly shut so liquid beads naturally on the raw grain.

Set Includes
Carafe + 2 Guinomi
Lead Time
4–6 weeks
¥38,500

02 / Material & Geometry Workbench

Three woods, one pressure lock.

Every vessel begins by selecting straight-grained quartersawn heartwood (masame) split along natural fibers. Compare how each timber behaves under moisture, bevel tension, and time.

How does a bucket hold ice water overnight with zero glue between 22 individual planks?

Kiso Valley · 250-Year-Old Growth

Kōyamaki — Waterproof Oil Density

SPEC: KY-22-CU
Ø 240 mm H 240 TAPER 3.8° · 22 STAVES
Air Drying
12–15 yrs
Stave Count
22 staves
Joint Bevel
8.18° / side
Wall Width
13.5 mm

Kōyamaki resists decay better than almost any Japanese conifer. When filled with chilled water and ice, the outer fibers expand microscopically against the hand-braised copper rings, locking every seam dry on the exterior.

03 / Hira Workshop, Shiga

Moved to the mountain air in 2003.

Shuji Nakagawa trained under his father, Living National Treasure Kiyotsugu Nakagawa, in central Kyoto before establishing the independent Hira Workshop on the western shore of Lake Biwa.

Kiln-drying rushes cedar and fractures cell walls. Stacked beneath wide eaves facing Mount Hira, raw planks season through lake winters and summer rains for over a decade before a hand plane ever touches them.

Mount Hira ridge rising above Lake Biwa in Shiga Prefecture, Japan
The Hira range seen across Lake Biwa — humid valley air steadies timber shrinkage year-round.
Nakagawa timber workbench overlooking misty cedar hills with hinoki shavings, kanna hand plane, and craftsman at work
Main planing bench at 419 Hachiyado, Otsu — shavings gauged under 0.04 mm. Est. Hira Studio 2003

Notes from Kitchens & Studios

“We have run two Sawara rice tubs through dinner service six nights a week since 2019. Neither seam has opened a fraction of a millimeter, and the rice stays loose until the last seating.”

Kenji Morimoto Head Chef, Gion, Kyoto

“The Jindai-sugi stool arrived crated in paulownia and smelled faintly of wet forest soil. No lacquer, just a blade finish you can feel with your thumb.”

Maren Lindholm Partner Architect, Copenhagen

“After four winters in a dry apartment our cooler hoop loosened slightly. I mailed it back to Otsu and Shuji-san tapped it tight and re-planed the base rim within ten days.”

Taro Hayakawa Private Collector, Meguro, Tokyo

04 / Practical Care & Lead Times

Before you commission a piece.

Why do vessels take 6 weeks to 6 months to finish?
Rough-shaped staves are left resting in the workshop for several weeks after initial cutting so internal wood stresses settle before final joint planing and copper hoop driving. Rushing this pause causes hairline leaks months later.
How do I keep dry wood from shrinking in winter heating?
Keep vessels out of direct sunlight and away from radiator vents. After rinsing with cool water, wipe dry with a clean cotton cloth and let air circulate upside-down on a slatted rack rather than sealing wet wood inside a cabinet.
Can loose copper hoops be tightened years later?
Yes. Traditional ki-oke vessels are built to be serviced for decades. If a hoop ever slips after years in dry climate, fill the vessel with cold water overnight so staves swell, or return it to Otsu for workshop re-hooping and fresh interior planing.
Can I visit the Hira Workshop near Kyoto?
Because Hira is an active woodworking bench rather than a walk-in storefront, studio visits are scheduled in advance (09:00–18:00). We are 35 minutes north of Kyoto Station along the JR Kosei Line.

Direct Bench Allocation

Reserve upcoming timber stock or schedule a studio visit.

Tell us which edition, timber, or custom restaurant dimensions you need. We reply directly from the Otsu studio with current seasoning stock and an exact delivery window.

Workshop Dispatch Details

Workshop
419 Hachiyado, Otsu, Shiga 520-0515
Hours
09:00 – 18:00 JST (By appointment)
Shipping
Japan & insured worldwide crates

Kōyamaki Cypress · Hammered Copper

Konoha Champagne Cooler

Konoha Champagne Cooler studio plate

Carved along a sweeping asymmetric leaf rim that guides condensation down the interior wall. Hand-fitted from 12-year seasoned Kōyamaki cypress staves and bound with hammered dark copper hoops.

Dimensions
280 × 175 × 240 mm
Weight
Approx. 780 g
Studio Price
¥165,000
Lead Time
3–4 months

Care: Rinse with cool water after ice service; dry inverted on a slatted rack away from heaters.

Hira Workshop Dispatch

Commission or Studio Visit

Please enter your name (at least 2 characters).
Please enter a valid email address so the studio can reply.
Please share your city or country for crating estimates.

Direct preview form — no payment is collected online.

Hira Studio Index

Inquiry recorded for the Hira Studio ledger.